UG Uganda
  • 75 - Erdöl u. zugehörige Technologien

Engine oils; Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing, as basic constituents, 70% or more by weight of petroleum oils or of oils obtained from bituminous minerals. (HS 3403). Lubricants, industrial oils and related products (ICS 75.100).

DUS 2056:2018 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between ‑10°C and -35°C Using Cold-Cranking Simulator, First Edition. (19 page(s), in English)

This Draft Uganda Standard covers the test method for the laboratory determination of apparent viscosity of engine oils and base stocks by cold cranking simulator (CCS) at temperatures between -10°C and -35°C at shear stresses of approximately 50 000 Pa to 100 000 Pa and shear rates of approximately 105 to 104 s-1 for viscosities of approximately 900 mPa·s to 25 000 mPa·s. The range of an instrument is dependent on the instrument model and software version installed. Apparent Cranking Viscosity results by this method are related to engine-cranking characteristics of engine oils.

Bitte kontaktieren Sie