Radio equipment in the Low power wide area networks LPWAN (also known as non-IMT IoT) operating in the 920 MHz – 922.5 MHz band; Devices in the LPWAN IMT systems (also known as IMT IoT) using licensed frequency spectrum for IMT public mobile communication are not covered.
The List of products covered: Radio equipment in the Low power wide area networks LPWAN operating in the 920 MHz – 922.5 MHz band (HS code: 8517.69.00; 8517.62.21; description: equipment which include sensors and access devices connected to each other via a radio interface that senses remote measurement, remotely records and transmits data)
Draft national technical regulation on radio equipment in the Low power wide area networks (LPWAN) operating in the 920 MHz frequency range (51 page(s), in Vietnamese)
This draft national technical regulation is based on ITU-R Report SM.2423-0, 06/2018; ITU-R Recommendation SM.329-12, 9/2012), ETSI EN 300 220-1 V3.1.1, 02/2017, ETSI EN 300 220-2 V3.2.1, 6/2018; Regulation number 3/2019 of Indonesia, Class assignment No. 1-2017 of Malaysia; IMDA TS SRD Issue 1 Revision 1, 4/2018 of Singapore.
This draft national technical regulation specifies technical requirements on radio frequency, technical conditions and test procedures for radio equipment in the Low power wide area networks LPWAN (also known as non-IMT IoT) operating in the 920 MHz – 922.5 MHz band.
The following provisions are included:
1. General provisions
2. Technical requirements
3. Regulatory requirements
4. Obligation of organizations and individuals
Annex A (normative): Technical performance of the test equipment
Annex B (normative): Test fixture
Annex C (informative): Test sites and arrangements for radiated measurement
Annex D (normative): List of radio equipment in low power wide area network LPWAN operating at 920-922.5 MHz must meet the QCVN.