Broadband data transmission equipment with equivalent isotropic radiated power (e.i.r.p) to 100 mW operating in frequency band (transmit: 2 400 MHz - 2 483.5 MHz; receive: 2 400 MHz – 2 483.5 MHz).

Ultra Wide Band (UWB) devices are not covered by this regulation.

List of specific devices required to conform with the QCVN:

- Radio transceivers using spectrum modulation technology on the 2.4 GHz band have an equivalent isotropic radiated power of between 60 mW and 100 mW (HS code: 8517.62.51)

- Flycams, which use remote control technology, transmit images by modulated radio waves spread across the 2.4 GHz band and has an equivalent isotropic radiated power of 60 mW or more (HS code: 8525.80.40) 

- UAVs / Drones, which use remote control technology, transmit images by modulated radio waves spread over the 2.4 GHz band and has an equivalent isotropic radiated power of 60 mW or more (HS code: 8802.20.90)

Draft national technical regulation on wideband data transmission equipment operating in the 2.4 GHz band (109 page(s), in Vietnamese)

The draft National technical regulation is based on ETSI EN 300 328 v2.2.2 (2019-07) "Wideband transmission systems; Data transmission equipment operating in the 2.4 GHz band; Harmonized Standard for access to radio spectrum".

This draft National technical regulation specifies essential radio requirements and conformance test procedures for wideband data transmission equipment operating in the 2.4 GHz band.

The following provisions are included:

1. General provisions

2. Technical requirements

2.1. Environment condition

2.2. Classification of equipment

2.3. Technical requirements

3. Test method

4. Regulatory requirements

5. Obligation of organizations and individuals

6. Implementation

Annex A (normative): test sites and arrangement for radiated measurements 

Annex B (normative): Measurement procedures for radiated measurement

Annex C (informative): Forms provide information about products applicable to testing

Annex D (normative): List of products of broadband data transmission equipment operating on 2.4 GHz band must meet this QCVN.

Bibliography

This National technical regulation is intended to supersede current National technical standards (QCVN 54: 2011/BTTTT "National technical regulation on radio equipment operating in the 2.4 GHz band and using spread spectrum modulation techniques")