Engine oils; Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing, as basic constituents, 70% or more by weight of petroleum oils or of oils obtained from bituminous minerals. (HS 3403). Lubricants, industrial oils and related products (ICS 75.100).

DUS 2057:2018 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique, First Edition. (21 page(s), in English)

This Draft Uganda Standard covers the test method for the measurement of the apparent viscosity of engine oil at low temperatures. A shear rate of approximately 0.2 s-¹ is produced at shear stresses below 100 Pa. Apparent viscosity is measured continuously as the sample is cooled at a rate of 1°C/h over the range ‑5°C to -40°C, or to the temperature at which the viscosity exceeds 40 000 mPa.s (cP).