1.    SNI 8887:2020 High density polyethylene with PE 100 Classification for gas fuel delivery pipe aplication (HS 3901.20.00).

2.    SNI 7593:2020 High density polyethylene (HDPE) for drinking water pipe raw material (HS 3901.20.00).

3.    SNI 7808:2018 Polyethylene plastic pellets (HS 3901.10.92, 901.10.99, 3901.20.00 and 3901.40.00)

4.    SNI 0594:2011 Polypropylene (HS 3902.1040 and 3902.30.90)

5.    SNI 432:2017 Impact Copolymer Polypropylene for Automotive Components (HS 3902.30.90)

6.    SNI 59:2017 Polyvinyl Chloride Resin (HS 3904.10.10)

Draft Decree of Minister of Industry on Mandatory Implementation of Indonesian National Standard for Plastics Raw Material; (52 page(s), in Indonesian)

This draft of decree states that of Plastics raw Material produced within the country or imported, distributed and marketed in the country shall fulfil the SNI requirements. The producers which produced these products therefore shall comply with those requirements proven by having Product Certificate for Using SNI Mark.

The product certificate on SNI marking shall be issued by a Product Certification Body which has been accredited by KAN and appointed by the Minister of Industry through testing of the conformity of the products quality against SNI requirements.

Directorate of Industrial Upstream Chemistry is the institution that is responsible for the implementation of this decree and shall provide a technical guidance of the decree, which cover procedure of Product Certification and SNI Marking.

Products which are distributed in domestic market that originated domestically and imported shall meet the requirements consisted in:

SNI 8887:2020, SNI 7593:2020, SNI 7808:2018, SNI 0594:2011, SNI 8432:2017, SNI 59:2017 which specifies term and definition, quality requirements, sampling, testing method, testing acceptance, marking requirement and packaging (this standard is available in Indonesian).