Telecommunication equipment, radio equipment and telecommunication terminal equipment

·         Draft revision of the Ordinance of the Swiss Federal Office of Communications on telecommunications installations (OOIT), 2 pages in French, German and Italian (to be amended)

·         Radio Interface Regulation (RIR): RIR0203-14, RIR0203-15, RIR0203-16, RIR0203-17, RIR0203-18, RIR0203-20, RIR0302-12, RIR0302-17, RIR0302-24, RIR0302-31, RIR0302-32, RIR0302-46, RIR0302-48, RIR0806-15, RIR0806-20, RIR0808-13, RIR1003-11, RIR1003-12, RIR1004-01, RIR1010-05 (to be amended) 

^.         No Radio Interface Regulation (RIR) is completely new or abrogated

The Ordinance of the Swiss Federal Office of Communications on telecommunications installations (OOIT) specifies the basic technical requirements with regard to telecommunications installations set out by the Swiss Federal Council. It regulates the use of radio interfaces in Switzerland.

For the RIR0203-14, RIR0203-15 and RIR0203-20 the "application description" will be modified to "Video PMSE" instead of "SAP/SAB and ENG/OB".

For the RIR0203-16, RIR0203-17, RIR0203-18 the channelling requirement (7 MHz) and the maximum occupied bandwidth requirement (20 MHz) will be removed.

In the RIR0302-12 an error will be corrected, due to the fact, that during transition from the R&TTE-Directive to the RE-Directive the number of the harmonized standard has changed (old: EN 302 217-4-2 new: EN 302 217-4)

For the RIR0302-17, RIR0302-24, RIR0302-31, RIR0302-32, RIR0302-46, RIR0302-48 additional channellings (55 MHz, 112 MHz, 56 MHz, 56 MHz, 1000 MHz, 112 MHz) will be added.

For the RIR0806-15 a reduction of the receiving frequency range from 3.40 - 4.20 GHz down to 3.60 - 4.20 GHz will be introduced.

For the RIR0806-20 adaptions will be done due to amendment of the ECC/DEC/(13)01.

For the RIR0808-13 the reference ERC/DEC/(99)05 will be removed because this decision has been withdrawn.

For the RIR1003-11, RIR1003-12 the requirement of a minimum occupied bandwidth of 600 kHz will be introduced.

For the RIR1004-01 the reference ERC/DEC(01)08 will be replaced by ECC/DEC/(18)03. For the RIR1010-05, an additional limit (25mW) is defined, which applies to equipment to be used inside vehicles.