Telecommunication equipment, radio equipment and telecommunication terminal equipment

Draft revision of the Ordinance of the Swiss Federal Office of Communications on telecommunications installations (OOIT)

• Radio Interface Regulation (RIR): RIR0203-14, RIR0203-15,
RIR0203-16, RIR0203-17, RIR0203-18, RIR0203-20, RIR0302-12, RIR0302-17,
RIR0302-24, RIR0302-31, RIR0302-32, RIR0302-46, RIR0302-48, RIR0806-15,
RIR0806-20, RIR0808-13, RIR1003-11, RIR1003-12, RIR1004-01, RIR1010-05
(to be amended)

• No Radio Interface Regulation (RIR) is completely new or abrogated

The Ordinance of the Swiss Federal Office of Communications on telecommunications installations (OOIT) specifies the basic technical requirements with re-gard to telecommunications installations set out by the Swiss Federal Council. It regulates the use of radio interfaces in Switzerland.

For the RIR0203-14, RIR0203-15 and RIR0203-20 the “application description” will be modified to “Video PMSE” instead of “SAP/SAB and ENG/OB”.

For the RIR0203-16, RIR0203-17, RIR0203-18 the channelling requirement (7 MHz) and the maximum occupied bandwidth requirement (20 MHz) will be removed.

In the RIR0302-12 an error will be corrected, due to the fact, that during transition from the R&TTE-Directive to the RE-Directive the number of the harmonized standard has changed (old: EN 302 217-4-2 new: EN 302 217-4)

For the RIR0302-17, RIR0302-24, RIR0302-31, RIR0302-32, RIR0302-46, RIR0302-48 additional channellings (55 MHz, 112 MHz, 56 MHz, 56 MHz, 1000 MHz, 112 MHz) will be added.

For the RIR0806-15 a reduction of the receiving frequency range from 3.40 - 4.20 GHz down to 3.60 - 4.20 GHz will be introduced.

For the RIR0806-20 adaptions will be done due to amendment of the ECC/DEC/(13)01.

For the RIR0808-13 the reference ERC/DEC/(99)05 will be removed because this decision has been withdrawn.

For the RIR1003-11, RIR1003-12 the requirement of a minimum occupied bandwidth of 600 kHz will be introduced.

For the RIR1004-01 the reference ERC/DEC(01)08 will be replaced by ECC/DEC/(18)03.

For the RIR1010-05, an additional limit (25mW) is defined, which applies to equipment to be used inside vehicles.