2017/0617/GR
EC/EFTA
GR Griechenland
  • B00 - BAUWESEN
2018-03-28
2018-01-04

Public works and studies, Building envelope insulations systems using expanded polystyrene (EPS) and thin reinforced composite renderings - ETICS

Approval of seventy (70) Hellenic Technical Specifications (HTS), the application of which is mandatory in all public works and studies

ELOT TS 1501-03-06-02-04 Building envelope insulation systems using expanded polystyrene (EPS) and thin reinforced composite renderings - ETICS

Approval of seventy (70) Hellenic Technical Specifications (HTS), the application of which is mandatory in all public works and studies

ELOT TS 1501-03-06-02-04 Building envelope insulation systems using expanded polystyrene (EPS) and thin reinforced composite renderings - ETICS

The subject of the ELOT TS 1501-03-06-02-04 Specification is the thermal insulation of exterior walls using industrially manufactured heat insulating products for buildings from expanded polystyrene EPS, as well as their way of application, depending:

- on the type of wall in terms of materials and structure;

- on the application position of insulating coats in relation to the vertical planes of the walls;

- on whether the walls are exposed to rain and wind and on the reduction of humidity penetration inside the walls;

- on the requirements regarding reduction of thermal bridges, linear heat losses, internal surface condensations as well as condensation within the walls and on the individual vertical planes of the walls.

Heat insulating products produced onsite do not fall within the scope of this Specification.

In order to apply this specification, an application design study must be conducted by a qualified engineer.